|
Features:
Our Graco 395-ST Airless Sprayers are tough commercial airless paint sprayers designed to help you finish
your painting project in record time. The pumps can be fed from a 5 gallon paint bucket and feature a 50' spray hose The spray
gun features a reversible tip for instant blow out of any clogged nozzles but is probably not that necessary because these
units do feature an integral paint filter to trap any particles that may have gotten into your paint. These units are excellent
choices for spraying both interior and exterior finishes (as long as you don't pick the windiest day of the year) and can
handle oil based paints, latex, varnishes, and stains. Because these units feature a precision piston based pump they are not
to be used for masonry sealers such as Drylock or any paint with any sand or texture in it. If you are spraying these items our
Texture Sprayer would be the perfect choice for you.
If you are doing smaller areas that require precision control and minimal overspray our
HVLP Fine Finish Sprayer is a great choice.
These units are available with a large selection of nozzles to insert into the gun. These nozzles are sold for
$12.00 and vary as to the fan width and are custom sized for whatever paint or finish you will be spraying.
They are the reversible type that can be easily reversed with a twist of the wrist to clear any paint skin clogs from the nozzle that may not
have been properly strained. One nozzle is
sufficient for all but the largest painting projects. Note that if you are spraying an oil based coating you will need
approx 2 gallons of paint thinner in order to adequately flush the unit and clean it when you are finished.
|
|
Specifications:
Power Requirements 20 Amp Circuit - 120 Volts AC
Maximum Nozzle Size .019"
Delivery .33 GPM at 3,000 PSI
Weight 37 lbs.
|
Rates:
Day
Week
4 Weeks
|
55.00
220.00
660.00
|