Features:
Our 155,000 BTU Propane Heater is a forced air heater that's fired by propane. This is the workhorse of the construction industry and is used to heat large areas with ease. The heater can be used with multiple LP tanks via a pigtail adaptor to extended running time for continuous operation. An integral thermostats is mounted on each heater to help control the output. A 120 volt circuit is required to run the fan and ignition system. Unlike kerosene heaters, these units burn much cleaner and are the choice of drywallers, painters, and anyone doing finish work.

This unit doesn't produce carbon monoxide, but, like all portable heaters, they do burn oxygen. If the area is well sealed you will run out of oxygen in the area so these units are not to be used for living areas. If you are using them in a work area be sure to allow for adequate makeup air or else the unit will begin to run rich after a while and your eyes may burn. Because of the open flame design these units are not to be used in a room while spray painting or using cleaning solvents. They can be used to preheat the work area but should be removed from the room while painting and then returned after the fumes have been vented out.

Fuel isn't included in the rental rate but LP tanks are available in 30 lb., 60 lb., or 100 lb. sizes. The heaters are designed to operate on one tank, but pigtails are available to connect additional tanks to extend the run time between refills. If you have multiple tanks you can always rotate them out when empty and exchange them for full ones without shutting down the heater for long periods of time. Rates does not include fuel or tank rental charges. Actual propane use will be charged upon return after weighing the tank.
 

 
See More Heating & Ventilating Equipment
Back to Main Rental Catalog