14" Walk Behind
Pneumatic Concrete Saw
The Walk Behind Air Saw is a popular tool for safely cutting concrete floors in enclosed areas, such as basements. The walk behind air saw
is powered by a pneumatic motor. It features a 14" diameter blade, which can cut to a maximum depth of 4.5". Because it is powered
by an air motor it is ideal for use in confined spaces like basements. There is no risk of electrical shock because electricity is not present.
There is also no risk of carbon monoxide poisoning because there is no gas engine on this unit. Instead it uses compressed air supplied by an
air compressor that is situated outside of the confined work area. The air supply is fed to the saw via 3/4" inside diameter air hoses and
can be run 200' without any pressure loss. The air supply can also be supplied by plant air if being used in a factory application but it is important
to ensure that an adequate air supply is delivered to the saw or it just won't perform. This saw requires a minimum of 120 CFM (cubic feet per minute)
of air volume. This is equivalent to a 30 HP electric compressor. Also the air lines to this unit cannot be smaller than 3/4" pipe size and may
need to be larger if the run is longer. We suggest that any industrial account wishing to use this saw contact us first and we can help you decide whether
or not your plant air is capable of handling this saw. The portable compressors that we rent for this saw are the 210 CFM diesel powered towable units that
are pretty much standard in the construction industry. Please Click Here
for a link to these air compressors.
Most renters will be renting a diamond blade designed for this saw but there are customers who are frequent renters who have purchased their own blade
therefore blades are not included in the rental rate for this saw. Please
Click Here for a link to the diamond blade page.
If you need to cut walls or make cuts that just won't work for a floor saw we have a hand held air saw which also works great in enclosed areas. For floor
work, however, the walk behind air saw makes it easy to cut straighter lines and saves your back from having to bend over when sawing. For info on the
hand held saw please click on the following link to read more about it:
Hand Held Air Saw
Depth of Cut: 4.5"
Blade Size: 14" Diameter with 1" arbor and pin hole
Gast Air Motor
Weight: 110 lbs.